Ioflupane I 123

Ioflupane I 123 is an FDA-registered drug product whose active ingredient is IOFLUPANE I-123. It is labelled by Curium US LLC taken by intravenous and marketed as a human prescription drug product. Identifiers on file: NDC 69945-166, application ANDA213792, label effective 20221216. It is one of 2 FDA drug label records sharing the active ingredient IOFLUPANE I-123. This page reproduces the FDA-approved label text so you can check what a product is, who makes it and how it is supplied before discussing it with a pharmacist or prescriber.

Across FDA labelling, products containing IOFLUPANE I-123 are most often described in connection with: ioflupane injection, indicated adjunct, diagnostic evaluations, striatal dopamine, transporter visualization, single photon, emission computed, tomography spect. Wording differs between labels, and the full indications section on this page takes precedence when it is present.

1 INDICATIONS AND USAGE Ioflupane I 123 Injection is indicated as an adjunct to other diagnostic evaluations for striatal dopamine transporter visualization using single photon emission computed tomography (SPECT) brain imaging in adult patients with: ● suspected Parkinsonian syndromes (PS) or ● suspected dementia with Lewy bodies (DLB). Ioflupane I 123 Injection is a radioactive diagnostic agent indicated as an adjunct to other diagnostic evaluations for striatal dopamine transporter visualization using single photon emission computed tomography (SPECT) brain imaging in adult patients with: suspected Parkinsonian syndromes (PS) or suspected dementia with Lewy bodies (DLB). ( 1 )

2 DOSAGE AND ADMINISTRATION Administer a thyroid-blocking agent at least one hour before the dose of Ioflupane I 123 Injection. ( 2.2 ) The recommended dose of Ioflupane I 123 Injection in adult patients is 111 MBq to 185 MBq (3 mCi to 5 mCi) administered intravenously over at least 20 seconds. ( 2.3 ) Measure patient dose using a dose calibrator immediately prior to administration. ( 2.4 ) Begin SPECT imaging between 3 hours and 6 hours post-injection. ( 2.6 ) Figure 1,2,3,4 2.1 Radiation Safety Ioflupane I 123 Injection emits radiation and must be handled with safety measures to minimize radiation exposure to healthcare providers and patients [ see Warnings and Precautions ( 5.3 ) ]. Radiopharmaceuticals should be used by or under the control of healthcare providers who are qualified by specific training and experienced in the safe use and handling of radionuclides, and whose experience and training have been approved by the appropriate government agency authorized to license the use of radionuclides. To minimize radiation exposure, encourage hydration prior to and following Ioflupane I 123 Injection administration in order to permit frequent voiding. Encourage the patient to void frequently for the first 48 hours following Ioflupane I 123 Injection administration [ see Dosage and Administration ( 2.5 ) ]. 2.2 Thyroid Blockade Before Ioflupan e I 123 Injection Administration Administer Potassium Iodide Oral Solution or Strong Iodine Solution (e.g., Lugol's Solution) equivalent to 100 mg iodide to block uptake of iodine-123 by the patient's thyroid at least one hour before the dose of Ioflupane I 123 Injection [ see Warnings and Precautions ( 5.2 ) ]. 2.3 Recommended Dos age The recommended dose of Ioflupane I 123 Injection in adult patients is 111 MBq to 185 MBq (3 mCi to 5 mCi) administered intravenously over at least 20 seconds. 2. 4 Preparation and Administration Assess pregnancy status before administering Ioflupane I 123 Injection to a female of reproductive potential [ see Use in Specific Populations ( 8.1 ) ]. Use aseptic procedures and radiation shielding during preparation and administration. Inspect the Ioflupane I 123 Injection vial for particulate matter and discoloration prior to administration and do not use it if the vial contains particulate matter or discoloration. Measure patient dose using a dose calibrator immediately prior to administration. Discard unused portion. 2.5 Radiation Dosimetry The estimated radiation absorbed doses to an adult from intravenous injection of Ioflupane I 123 Injection are shown in Table 1. The values are calculated assuming urinary bladder emptying at 4.8-hour intervals and appropriate thyroid blocking (iodine-123 is a known Auger electron emitter). Table 1 Estimated Radiation Absorbed Doses from Ioflupane I 123 Injection ORGAN / TISSUE ABSORBED DOSE PER UNIT ADMINISTERED ACTIVITY (μGy / MBq) Adrenals 12.9 Brain 17.8 Striata 230 Breasts 7.8 Gallbladder Wall 26.4 GI Tract Esophagus 10 Stomach Wall 11.2 Small Intestine Wall 21.2 Colon Wall a 39.8 Upper Large Intestine Wall 38.1 Lower Large Intestine Wall 42 Heart Wall 12.9 Kidneys 10.9 Liver 27.9 Lungs 41.2 Muscle 9.4 Osteogenic Cells 28.2 Ovaries 16.8 Pancreas 13 Red Marrow 9.2 Skin 6 Spleen 10.4 Testes 8.5 Thymus 10 Thyroid 9 Urinary Bladder Wall 53.1 Uterus 16.1 Total Body 11.3 EFFECTIVE DOSE PER UNIT ADMINISTERED ACTIVITY (µSv/MBq) 21.3 a The absorbed dose to the colon wall is the mass-weighted sum of the absorbed doses to the upper and lower large intestine walls, D c olon = 0.57D ULI + 0.43D LLI [Publication 80 of the ICRP (International Commission on Radiological Protection); Annals of the ICRP 28 (3). Oxford: Pergamon Press; 1998] The Effective Dose resulting from a Ioflupane I 123 Injection administration with an administered activity of 185 MBq (5 mCi) is 3.94 mSv in an adult. 2.6 Imaging Instructions Begin SPECT imaging 3 hours to 6 hours following Ioflupane I 123 Injection administration. Use a gamma camera fitted with high-resolution collimators and set to a photopeak of 159 keV with a ± 10% energy window. Angular sampling should be at least 120 views over 360 degrees. Position the patient supine with the head on an off-the-table headrest, use a flexible head restraint such as a strip of tape across the chin or forehead if necessary to help avoid movement, and set a circular orbit for the detector heads with the radius as small as possible (typically 11 cm to 15 cm). Obtain images with matrix size and zoom factors selected to give a pixel size of 3.5 mm to 4.5 mm. Collect a minimum of 1.5 million counts for optimal images. 2.7 Image Interpretation Interpret Ioflupane I 123 Injection images visually, based upon the appearance of the striata. Reconstructed pixel size should be between 3.5 mm and 4.5 mm with slices 1 pixel thick. Optimum presentation of the reconstructed images for visual interpretation is transaxial slices parallel to the anterior commissure-posterior commissure (AC-PC) line. Determine whether an image is normal or abnormal by assessing the extent (as indicated by shape) and intensity of the striatal signal. Image interpretation does not involve integration of the striatal image appearance with clinical signs and/or symptoms. Normal: In transaxial images, normal images are characterized by two symmetric comma- or crescent-shaped focal regions of activity mirrored about the median plane. Striatal activity is distinct, relative to surrounding brain tissue (Figure 1). Abnormal: Abnormal Ioflupane I 123 Injection images fall into at least one of the following three categories (all are considered abnormal). Activity is asymmetric, e.g., activity in the region of the putamen of one hemisphere is absent or greatly reduced with respect to the other. Activity is still visible in the caudate nuclei of both hemispheres resulting in a comma or crescent shape in one and a circular or oval focus in the other. There may be reduced activity between at least one striatum and surrounding tissues (Figure 2). Activity is absent in the putamen of both hemispheres and confined to the caudate nuclei. Activity is relatively symmetric and forms two roughly circular or oval foci. Activity of one or both is generally reduced (Figure 3). Activity is absent in the putamen of both hemispheres and greatly reduced in one or both caudate nuclei. Activity of the striata with respect to the background is reduced (Figure 4).

4 CONTRAINDICATIONS Ioflupane I 123 Injection is contraindicated in patients with known serious hypersensitivity to ioflupane I-123 [see Warnings and Precautions ( 5.1 )] . Known serious hypersensitivity to ioflupane I 123 ( 4 )

6 ADVERSE REACTIONS The following clinically significant adverse reaction is described elsewhere in the labeling: • Hypersensitivity Reactions [ see Warnings and Precautions ( 5.1 ) ] The following adverse reactions were reported at ≤1%: headache, nausea, vertigo, dry mouth and dizziness. ( 6.1 ) To report SUSPECTED ADVERSE REACTIONS, contact CURIUM US LLC at 1-866-789-2211 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch. 6.1 Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of Ioflupane I 123 Injection cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice. The data from clinical trials reflect exposure to Ioflupane I 123 Injection in 942 subjects with a mean age of 66 years (range 25 years to 90 years). Among these subjects, 42% were female and 99% White. Subjects received 88 MBq to 287 MBq (2 mCi to 8 mCi) [median 173 MBq (4.7 mCi)] intravenously as a single dose. The recommended dose of Ioflupane I 123 Injection is 111 MBq to 185 MBq (3 mCi to 5 mCi) [ see Dosage and Administration ( 2.3 ) ]. The following adverse reactions were reported at a rate of 1% or less: headache, nausea, vertigo, dry mouth, and dizziness. 6.2 Postmarketing Experience The following adverse reactions have been identified during postapproval use of Ioflupane I 123 Injection. Because these reactions are reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure. Immune system disorders : Hypersensitivity, including dyspnea, edema, rash, erythema, and pruritus General disorders and administration site conditions : Injection site pain

FDA lists 2 drug label records with IOFLUPANE I-123 as the active ingredient. The most common dosage forms and the manufacturers with the most records are summarised below; strengths, pack sizes and inactive ingredients can still differ between apparently similar products.

What is Ioflupane I 123 used for?
1 INDICATIONS AND USAGE Ioflupane I 123 Injection is indicated as an adjunct to other diagnostic evaluations for striatal dopamine transporter visualization using single photon emission computed tomography (SPECT) brain imaging in adult patients with: ● suspected Parkinsonian syndromes (PS) or ● suspected dementia with Lewy bodies (DLB). Ioflupane I 123 Injection is a radioactive diagnostic …

Who makes Ioflupane I 123?
Curium US LLC is the labeler of record for Ioflupane I 123. 2 FDA label records share the active ingredient IOFLUPANE I-123, so generic and branded versions may come from different companies; the manufacturer named on your pack is the one that matters for any enquiry.

What form does Ioflupane I 123 come in?
administered by intravenous. Strengths and pack sizes vary by label, so compare the NDC on your pack with the identifier listed on this page.

Is Ioflupane I 123 prescription or over-the-counter?
The FDA label for this product is recorded as human prescription drug. Marketing status can differ between strengths and countries, so check the dispensing rules where you live.

Are there other products containing IOFLUPANE I-123?
Yes. 2 FDA drug label records list IOFLUPANE I-123 as the active ingredient. Products with the same active ingredient can usually be substituted only when a prescriber or pharmacist confirms it is appropriate.

Has Ioflupane I 123 been recalled?
No FDA recall record in our database matches this product name or manufacturer. Recall data is updated periodically, so a very recent notice may not appear here yet.

Where does this information come from?
All content is reproduced from FDA Structured Product Labelling data via openFDA. It is provided for identification and reference only and is not medical advice.