Ascor
Ascor is an FDA drug label for the active ingredient ASCORBIC ACID manufactured by McGuff Pharmaceuticals, Inc. administered by INTRAVENOUS. This page reproduces the FDA-approved indications and usage, dosage, contraindications, warnings, and adverse reactions exactly as published in the drug label. Data source: openFDA (U.S. FDA), label effective 20260529.
- Generic name
- ASCORBIC ACID
- Manufacturer
- McGuff Pharmaceuticals, Inc.
- Product type
- HUMAN PRESCRIPTION DRUG
- Route
- INTRAVENOUS
- Dosage form
- N/A
- NDC
- 67157-101
- Application
- NDA209112
- Label effective
- 20260529
About this product
Ascor is an FDA-registered drug product whose active ingredient is ASCORBIC ACID. It is labelled by McGuff Pharmaceuticals, Inc. taken by intravenous and marketed as a human prescription drug product. Identifiers on file: NDC 67157-101, application NDA209112, label effective 20260529. It is one of 2 FDA drug label records sharing the active ingredient ASCORBIC ACID. This page reproduces the FDA-approved label text so you can check what a product is, who makes it and how it is supplied before discussing it with a pharmacist or prescriber.
What it is used for
Across FDA labelling, products containing ASCORBIC ACID are most often described in connection with: ascor vitamin, short term, week treatment, scurvy adult, pediatric patients, age months, oral administration, possible insufficient. Wording differs between labels, and the full indications section on this page takes precedence when it is present.
Indications & Usage
1. INDICATIONS AND USAGE ASCOR is vitamin C indicated for the short term (up to 1 week) treatment of scurvy in adult and pediatric patients age 5 months and older for whom oral administration is not possible, insufficient or contraindicated. Limitations of Use ASCOR is not indicated for treatment of vitamin C deficiency that is not associated with signs and symptoms of scurvy. ASCOR is vitamin C indicated for the short term (up to 1 week) treatment of scurvy in adult and pediatric patients age 5 months and older for whom oral administration is not possible, insufficient or contraindicated. Limitations of Use ASCOR is not indicated for treatment of vitamin C deficiency that is not associated with signs and symptoms of scurvy.
Dosage & Administration
2. DOSAGE AND ADMINISTRATION Supplied in Pharmacy Bulk Package (PBP). Dispense single doses to multiple patients in a pharmacy admixture program; use within 4 hours of puncture. (2.1) Must be diluted prior to use (2.1) Administer as a slow intravenous infusion (2.1) See Full Prescribing Information for important administration instructions (2.1) Maximum recommended duration is one week (2.2) Population (2.2) Recommended Doses Pediatric patients age 5 months to less than 12 months 50 mg once daily Pediatric patients age 1 year to less than 11 years 100 mg once daily Adults and pediatric patients age 11 years and older 200 mg once daily Specific Populations (2.3, 8.1, 8.2) Pregnant women, lactating women, patients with glucose-6-phosphate dehydrogenase deficiency Should not exceed the U.S. Recommended Dietary Allowance (RDA) Supplied in Pharmacy Bulk Package (PBP). Dispense single doses to multiple patients in a pharmacy admixture program; use within 4 hours of puncture. (2.1) Must be diluted prior to use (2.1) Administer as a slow intravenous infusion (2.1) See Full Prescribing Information for important administration instructions (2.1) Maximum recommended duration is one week (2.2) Population (2.2) Recommended Doses Pediatric patients age 5 months to less than 12 months 50 mg once daily Pediatric patients age 1 year to less than 11 years 100 mg once daily Adults and pediatric patients age 11 years and older 200 mg once daily Specific Populations (2.3 , 8.1 , 8.2) Pregnant women, lactating women, patients with glucose-6-phosphate dehydrogenase deficiency Should not exceed the U.S. Recommended Dietary Allowance (RDA) 2.1 Important Preparation and Administration Instructions ASCOR vials contain 25, 000 mg of ascorbic acid and the largest recommended single dose is 200 mg. Do not give the entire contents of the vial to a single patient. Do not administer ASCOR as an undiluted intravenous sensitive. Minimize exposure to light because ASCOR is light sensitive. ASCOR is supplied as a Pharmacy Bulk Package (PBP) which is intended for dispensing of single doses to multiple patients in a pharmacy admixture program and is restricted to the preparation of admixtures for infusion: a. Use only in a suitable ISO Class 5 work area such as a laminar flow hood (or an equivalent clean air compounding area) b. Penetrate each PBP vial closure only one time with a suitable sterile transfer device or dispensing set that allows measured dispensing of the contents. Given that pressure may develop within the vial during storage, excercise caution when withdrawing contents from the vial. c. Once the closure system has been penetrated, complete all dispensing from the PBP vial within 4 hours. Each dose must be used immediately . Discard unused portion. d. Prior to administration, ASCOR must be diluted in a suitable infusion solution and the final solution for infusion must be isotonic (undiluted the osmolarity of ASCOR is approximately 5,900 mOsmol/L). Prior to preparing the admixture for infusion, calculate the osmolarity of the intended admixture for infusion. Add one daily dose of ASCOR directly to an appropriate volume of a suitable infusion solution (e.g., 5% Dextrose Injection, Sterile Water for Injection) and add appropriate solutes, as necessary, to make final solution isotonic. Sterile Water for Injection is highly hypotonic; adjust solute content, as necessary, to make thet final infusion solution isotonic prior to injection. Do not mix ASCOR with solutions containing elemental compounds that can be reduced (e.g., copper). The concentration of ascorbic acid in the final, admixture solution for infusion is to be the range of 1 to 25 mg of ascorbic acid per mL. For example, for the largest recommended dose: Add 200 mg of ascorbic acid (equivalent to 0.4 mL of ASCOR) to 7.5 mL of Sterile Water for Injection to produce an infusion solution having an approximate osmolarity of 290 mOsmol/L. In this specific example, addition of solute is NOT necessary because the solution is isotonic. e. Prepare the recommended dose based on the patient population [ see Dosage and Administration (2.2) , (2.3) ]. f. Visually inspect for particulate matter and discoloration prior to administration (the diluted ASCOR solution should appear colorless to pale yellow). g. Immediately administer the admixture for infusion as a slow intravenous infusion [ see Recommended Dosage, (2.2) ] ASCOR vials contain 25, 000 mg of ascorbic acid and the largest recommended single dose is 200 mg. Do not give the entire contents of the vial to a single patient. Do not administer ASCOR as an undiluted intravenous sensitive. Minimize exposure to light because ASCOR is light sensitive. ASCOR is supplied as a Pharmacy Bulk Package (PBP) which is intended for dispensing of single doses to multiple patients in a pharmacy admixture program and is restricted to the preparation of admixtures for infusion: a. Use only in a suitable ISO Class 5 work area such as a laminar flow hood (or an equivalent clean air compounding area) b. Penetrate each PBP vial closure only one time with a suitable sterile transfer device or dispensing set that allows measured dispensing of the contents. Given that pressure may develop within the vial during storage, excercise caution when withdrawing contents from the vial. c. Once the closure system has been penetrated, complete all dispensing from the PBP vial within 4 hours. Each dose must be used immediately. Discard unused portion. d. Prior to administration, ASCOR must be diluted in a suitable infusion solution and the final solution for infusion must be isotonic (undiluted the osmolarity of ASCOR is approximately 5,900 mOsmol/L). Prior to preparing the admixture for infusion, calculate the osmolarity of the intended admixture for infusion. Add one daily dose of ASCOR directly to an appropriate volume of a suitable infusion solution (e.g., 5% Dextrose Injection, Sterile Water for Injection) and add appropriate solutes, as necessary, to make final solution isotonic. Sterile Water for Injection is highly hypotonic; adjust solute content, as necessary, to make thet final infusion solution isotonic prior to injection. Do not mix ASCOR with solutions containing elemental compounds that can be reduced (e.g., copper). The concentration of ascorbic acid in the final, admixture solution for infusion is to be the range of 1 to 25 mg of ascorbic acid per mL. For example, for the largest recommended dose: Add 200 mg of ascorbic acid (equivalent to 0.4 mL of ASCOR) to 7.5 mL of Sterile Water for Injection to produce an infusion solution having an approximate osmolarity of 290 mOsmol/L. In this specific example, addition of solute is NOT necessary because the solution is isotonic. e. Prepare the recommended dose based on the patient population [ see Dosage and Administration (2.2), (2.3)]. f. Visually inspect for particulate matter and discoloration prior to administration (the diluted ASCOR solution should appear colorless to pale yellow). g. Immediately administer the admixture for infusion as a slow intravenous infusion [ see Recommended Dosage, (2.2)] 2.2 Recommended Dosage Table 1 provides recommended doses of ASCOR based on patient population and infusion rates of diluted ASCOR solution. Table 1: Recommended Dose of ASCOR and Infusion Rate of Diluted ASCOR Solution Patient Population ASCOR Once Daily Dose (mg) Infusion Rate of Diluted ASCOR Solution (mg/minute) Pediatric Patients age 5 months to less than 12 months 50 1.3 Pediatric Patients age 1 year to less than 11 years 100 3.3 Adults and Pediatric Patients 11 years and older 200 33 The recommended maximum duration of daily treatment with ASCOR is seven days. If no improvement in scorbutic symptoms is observed after one week of treatment, retreat until resolution of scorbutic symptoms is observed. Repeat dosing is not recommended in pediatric patients less than 11 years of age. 2.3 Dosage Reductions in Specific Populations Women who are pregnant or lactating and patients with glucose-6-dehydrogenase deficiency should not exceed the U.S. Recommended Dietary Allowance (RDA) or daily Adequate Intake (AI) level for ascorbic acid for their age group and condition [ see Warnings and Precautions (5.2) and Use in Specific Populations (8.1 , 8.2) ].
Contraindications
4. CONTRAINDICATIONS None. None.
Adverse Reactions
6. ADVERSE REACTIONS The following adverse reactions are discussed in greater detail in other sections of the labeling: Oxalate nephropathy and Nephrolithiasis [see Warnings and Precautions (5.1)] Hemolysis in patients with glucose-6-phosphate dehydrogenase deficiency [see Warnings and Precautions (5.2)] The following adverse reactions associated with the use of ascorbic acid were identified in the literature. Because these reactions are reported voluntarily from a population of uncertain size, it is not always possible to estimate their frequency reliably or to establish a causal relationship to drug exposure: Administration site reactions: pain and swelling. ASCOR should not be rapidly administered. Rapid intravenous administration (>250 mg/minute) of ASCOR may cause temporary faintness or nausea, lethargy, flushing, dizziness, and headache (the recommended infusion rates of diluted ASCOR solution are 1.3 mg/minute (Pediatric Patients age 5 months to less than 12 months), 3.3 mg/minute (Pediatric Patients age 1 year to less than 11 years) and 33 mg/minute (Adults and Pediatric Patients 11 years and older) [see Dosage and Administration (2.2)]). Acute and chronic oxalate nephropathy have occurred with prolonged administration of high doses of ascorbic acid [see Warnings and Precautions (5.1)]. In patients with glucose-6-phosphate dehydrogenase deficiency severe hemolysis has occurred [see Warnings and Precautions (5.2)]. Most common adverse reactions are pain and swelling at the site of infusion (6) To report SUSPECTED ADVERSE REACTIONS, contact McGuff Pharmaceuticals, Inc., toll free at 1-800-603-4795 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.
More products with the same ingredient
ASCORBIC ACIDHow products containing ASCORBIC ACID compare
FDA lists 2 drug label records with ASCORBIC ACID as the active ingredient. The most common dosage forms and the manufacturers with the most records are summarised below; strengths, pack sizes and inactive ingredients can still differ between apparently similar products.
| Dosage form | Products | Manufacturer | Products |
|---|---|---|---|
| — | — | McGuff Pharmaceuticals, Inc. | 1 |
| — | — | Renova Pharmaceuticals LLC | 1 |
| — | — | — | — |
| — | — | — | — |
| — | — | — | — |
Recall and safety notices
5 FDA recall record(s) match this product name or manufacturer. A match means the firm or product name appears in the enforcement report; confirm lot numbers and dates against the official FDA notice before acting.
| Recall | Product | Firm | Class | Status | Reported |
|---|---|---|---|---|---|
| N/A | Tri-Immune Boost (Glutathione: 200 mg, Ascorbic Acid: 200 mg, Zinc: 2.5 mg), 30 mL vial, Rx only, Centric Compounding, 7447 Harwin Dr. Suite 111, Houston, TX 77036 | Centric Compounding LLC | Not Yet Classified | Ongoing | 20261014 |
| D-0851-2026 | Glutathione 200 mg/mL, 30 mL sterile multidose vial, Each vial contains: Glutathione, Ascorbic Acid, Benzyl Alcohol & sterile water for injection, For IM or IV Injection Use Only, RX only, Optimal Balance Pharmacy, 2204 Cypress Creek Pkwy Suite F, Houston, TX 77090 | OPTIMAL BALANCE PHARMACY | Class I | Ongoing | 20260909 |
| D-0772-2026 | Glutathione (MDV), 200 mg/mL, 30 mL vial, each mL contains Glutathione 200 mg, Ascorbic Acid 20 mg, Benzyl Alcohol 1.5%, Na Hydroxide (Ph Adjust) in sterile water for injection, VMC. | Victory Medical Center Pharmacy | Class I | Ongoing | 20260819 |
| D-0040-2026 | Ascorbic Acid (Vitamin C) for Injection, Preservative Free, all strengths and presentations, GenoGenix, LLC, 2840 NW 2nd Ave Ste 204 Boca Raton, FL 33431-6692. | GenoGenix LLC | Class II | Ongoing | 20251015 |
| D-0041-2026 | Ascorbic Acid (Vitamin C) for Injection, Preserved, all strengths and presentations, GenoGenix, LLC, 2840 NW 2nd Ave Ste 204 Boca Raton, FL 33431-6692. | GenoGenix LLC | Class II | Ongoing | 20251015 |
Frequently asked questions
What is Ascor used for?
1. INDICATIONS AND USAGE ASCOR is vitamin C indicated for the short term (up to 1 week) treatment of scurvy in adult and pediatric patients age 5 months and older for whom oral administration is not possible, insufficient or contraindicated. Limitations of Use ASCOR is not indicated for treatment of vitamin C deficiency that is not associated with signs and symptoms of scurvy. ASCOR is vitamin C …
Who makes Ascor?
McGuff Pharmaceuticals, Inc. is the labeler of record for Ascor. 2 FDA label records share the active ingredient ASCORBIC ACID, so generic and branded versions may come from different companies; the manufacturer named on your pack is the one that matters for any enquiry.
What form does Ascor come in?
administered by intravenous. Strengths and pack sizes vary by label, so compare the NDC on your pack with the identifier listed on this page.
Is Ascor prescription or over-the-counter?
The FDA label for this product is recorded as human prescription drug. Marketing status can differ between strengths and countries, so check the dispensing rules where you live.
Are there other products containing ASCORBIC ACID?
Yes. 2 FDA drug label records list ASCORBIC ACID as the active ingredient. Products with the same active ingredient can usually be substituted only when a prescriber or pharmacist confirms it is appropriate.
Has Ascor been recalled?
5 FDA recall record(s) match this product name or manufacturer. Review the recall and safety notices section on this page and confirm lot numbers against the official FDA enforcement report.
Where does this information come from?
All content is reproduced from FDA Structured Product Labelling data via openFDA. It is provided for identification and reference only and is not medical advice.
This page reproduces FDA Structured Product Labelling data for identification and reference. It is not medical advice, does not diagnose or treat any condition, and does not sell or price any medicine.